Note: 1.The tent will be inflated by a inner blower which need continuously turn on.Blower is designed to be very quiet and energy saving, takes about several minutes to set up. 2.New equipment will have some plastic flavor or wrinkles on the surface which is normal, they usually disappear after a short period of time.
Note:
1.The tent will be inflated by a inner blower which need continuously turn on.Blower is designed to be very quiet and energy saving, takes about several minutes to set up.
2.New equipment will have some plastic flavor or wrinkles on the surface which is normal, they usually disappear after a short period of time. However after long-term
storage these can not be avoided in some cases. Set- ting up in a warm environment supports and accelerates this process. If possible, build the tent well
in advance of actual use to allow a chance for, possible kinks and plastic flavor to disappear or be reduced.
Instructions:
1. Do not open the package with sharp tools.
2. Place the tent on a smooth surface. It is best to spread a mat on the floor. This must be free of pointed objects which could damage to the product!
3. Connect the power cable and blow the tent about 3-10 minutes until it blowing upright.
4. Please stay away from fireworks more than 6 meters.
5. Storage: clean the equipment with wet cloth and pack it well, -50 ~ +40℃ is appropriate.
6. Washing tips: soap and water is all we recommend you use, no chemicals.
){kind=link}
Comments
Comments are disabled for this post.